UL 2345
Additional Details
APPLIANCE WIRING MATERIAL
Style 2345 Multiple-conductor cable using non-integral jacket
Rating 80 deg C, voltage rating not specified, Cable flame.
Insulated Conductor 30 AWG minimum, stranded. Labeled or complying with manufacturer’s AWM procedure.
Assembly Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
Covering Optional. Extruded PVC, 6 mils minimum thickness, applied over the conductor assembly.
Shield Optional.
Jacket Extruded PVC.
Diameter of cable under jacket* Minimum average thickness Minimum thickness at any point
1.501-2.500 inch 110 mils 88 mils
* – Major diameter if cable is flat or oval.
Standard Appliance Wiring Material UL 758.
Marking General.
Use External interconnection of computers and electronic equipment.
UL and the UL Logo are trademarks of UL LLC © 2014